Hi Peter:
Thank you for the clarification. I am now confident I understand
what you wrote in your previous E-Mail messages. Incidentally,
the libssh2 package compiles without problems in the Debian
Linux environment.
Best Regards,
Paul R.
Peter Stuge wrote:
> Hi,
>
> Paul Romero wrote:
> > What you wrote seems clear to me. However, let me describe
> > the host and target environment again to insure we understand
> > each other.
>
> I don't know if we need to. :) I described a general recipe for how
> to cross-compile libssh2 so that you could do it regardless of your
> platform. I guessed at the particular tuple, and it even turned out
> to be what you are using.
>
> > The important target settings are as follows:
> >
> > ARCH=m68knommu
> > CROSS_COMPILE=m68k-elf-
> >
> > Does this make sense to you ?
>
> See the email I wrote before:
>
> > > Make sure the toolchain programs are included in your PATH, and use
> > > the --host=tuple parameter when configuring libssh2. Substitute tuple
> > > with the prefix for your toolchain, so if your toolchain provides
> > > m68k-elf-gcc, then run configure --host=m68k-elf and include the
> > > library paths needed.
>
> You should use exactly the host tuple I wrote in the last mail, make
> sure to not include the trailing - that you included in the
> CROSS_COMPILE variable above.
>
> Good luck! Please report your progress.
>
> //Peter
> _______________________________________________
> libssh2-devel http://cool.haxx.se/cgi-bin/mailman/listinfo/libssh2-devel
-- Paul Romero RCOM Communications Software Phone/Fax: (510)339-2628 E-Mail: paulr_at_rcom-software.com _______________________________________________ libssh2-devel http://cool.haxx.se/cgi-bin/mailman/listinfo/libssh2-develReceived on 2010-07-03